Browse by Application
Browse by Application
Browse by Product Type
Browse by Product Type
CFAB™ Cellulose Absorptive Acoustical Panels
Cellulose-Based Acoustical Panels
- Controls reflections and deadens sounds within a room
- Easy to handle and install – No special equipment required
- Class A fire rating
- Resists mold growth
- Made from renewable and recycled fibers
- Low VOC Emissions - Passes CDPH V1.2 Test Standard and can contribute to LEED V4.1 EQ Credit: Low-Emitting Materials
Product Testing & Information
-
Product Spec SheetsInstallationCSI CAD REVITAcoustical TestsFire TestsMSDSMisc. DataLEED ContributionsTestimonialsAccess All
Product Specs
Applications
Industrial or mechanical applications where a low cost, high absorption product is more important than aesthetics, breweries or tap rooms, absorbent panels for behind stretched fabric or linear/slatted wooden walls or ceilings, under tables and chairs or in other situations where the room or space is going for an industrial / recycled aesthetic.
Thickness
1/2"
1"
2"
Density
3lb pcf – 1″ & 2″ thicknesses
6lb pcf – 1″ thickness
8lb pcf – 1″ thickness
13lb pcf – ½” thickness
Sizes
Standard Sizes
23 ¾” x 47 ¾” (1/2” thick panels / ceiling tile backers)
24" x 48" (1/2”, 1” and 2” panels)
48” x 96” (1/2” thick panels)
Additional Sizes
24" x 24", 48" x 48", 48" x 96"
Minimum quantities apply, please call for details.
Green Qualities
Made from a combination of recycled and renewable fibers, CFAB cellulose panels are environmentally responsible and sustainable. Most CFAB cellulose products are completely recyclable and no scrap is produced during the manufacturing process or installation of the material. In addition, they are manufactured using a greener process by reducing energy use and air pollution. Through an innovative manufacturing process, CFAB is produced as a cellulose-based product made primarily from post-consumer, post-industrial paper using recycled newspaper as the main raw material.
Acoustical Performance
The fiber matrix, panel thickness and core density of CFAB cellulose acoustical panels are a great way to reduce echo and deaden and reduce reverberation noise within a room. CFAB cellulose panels achieve high Noise Reduction Coefficient (NRC) ratings based on the density specified. The chart below represents NRC ratings for the four different thicknesses that can be produced. Sound Transmission Classification (STC) rating for the ½” thick product has been done for specific applications where noise reduction through a wall or floor/ceiling assembly is needed. The 1” and 2” panels can be used inside of a wall assembly and will help in the overall noise reduction performance of an assembly, but these thicknesses have not been tested for an STC rating.
Product Safety
Our CFAB Cellulose panels contains flame retardants to ensure maximum safety for building insulation, and carry a Class A fire rating. To protect against mold growth, CFAB cellulose panels contain an EPA-registered fungicide. CFAB does not contain any harmful airborne particles, and do not itch or irritate skin.
CFAB Cellulose Panels – Acoustical Testing Data | ||||||||
---|---|---|---|---|---|---|---|---|
Thickness | Absorption Coefficients @ Octave Band Frequencies (Hz) | NRC | ||||||
125 | 250 | 500 | 1,000 | 2,000 | 4,000 | |||
½″ | 0.05 | 0.09 | 0.33 | 0.64 | 0.87 | 1.01 | 0.50 | |
1″ | 0.09 | 0.26 | 0.84 | 1.05 | 1.05 | 1.05 | 0.80 | |
1½″ | 0.14 | 0.40 | 0.93 | 1.09 | 1.03 | 1.03 | 0.85 | |
2″ | 0.39 | 0.63 | 1.18 | 1.11 | 1.06 | 1.09 | 1.00 |
CFAB Cellulose Panels – Physical Property Data | ||
---|---|---|
Property | Test Method | Value |
Surface Burning Characteristics | ASTM E-84, UL 723 | Flame Spread: 15 Smoke Developed: <450 (Class A) |
Critical Radiant Flux | ASTM E-970 | >0.12 w/cm² |
Corrosiveness | ASTM C-739 | Acceptable |
Fungal Growth | ASTM C-1338 | Acceptable |
Thermal Resistance | ASTM C-518 | 3.6 – 3.7 R per Inch |
Moisture Absorption | ASTM C-739 | Acceptable |
Odor Emission | ASTM C-1304 | Acceptable |