Browse by Application
Browse by Application
Browse by Product Type
Browse by Product Type
Isolation Hangers™
- Permanently Resilient Fiber Glass Isolator Pad
- Constant Natural Frequency in Wide Load Range
- Load Capacities 20 lbs. to 200 lbs. (9 kg to 91 kg)
- 500% Overload Fail-Safe Assembly
- Both airborne noise and impact noise control
Product Testing & Information
Specifications:
Floor and ceiling isolation hangers shall consist of a fiberglass isolator encased in an anti-short circuit reinforced steel bracket which will accommodate up to #8 suspension wire or a 1/4″ (6.35 mm) bolt or screw.
The fiberglass ceiling isolation hanger shall be 1″ (25 mm) thick, precompressed, molded fiberglass composed of fiberglass produced by a multiple flame attenuation process which generates nominal fiber diameters not to exceed 0.00022″ (5.6 microns) and shall have been stabilized by precompression ten (10) times to three (3) times the maximum rated load of the material used.
The hanger assembly shall be zinc-plated reinforced steel and shall carry a five (5) times maximum rated load overload without failure. Hangers shall be Model AF.
Isolation Hangers | |||
---|---|---|---|
Hanger | Load Range | Maximum Deflection | |
AF-100 | 20-100 lbs | 0.27″ | |
9-46 kg | 6 mm | ||
AF-200 | 50-200 lbs | 0.18″ | |
23-91 kg | 4 mm |